• Home
  • Author: Alexander Westgarth

How to clean your mixer tapware effectively

A faucet pouring water into a cup

Kitchen mixer tapware needs to be cleaned on a regular basis since they come into touch with water on a daily basis and limescale may rapidly build up on the surface. Additionally, the aerator, which is a fine-mesh filter on the outflow, may get blocked with limescale deposits, which can cause the mixer tap to begin spraying. The following maintenance suggestions will assist you in avoiding these issues as efficiently as possible, allowing you to continue to enjoy a gleaming faucet for a long time to come.

Keeping limescale markings at bay in the right way

The majority of the time, while turning off your mixer tapware with wet hands after working in the kitchen, you will leave a few droplets of water on the tap. These get dry and leave a layer of limescale behind. It is possible for visible limescale to develop quite rapidly, especially in areas with hard water. The phrase “hard water” refers to water that has a high concentration of calcium bicarbonate. A hardness of 4 or below is required for the formation of limescale. As a result, if you have hard water, it is recommended that you dry the surface with a microfiber towel after each user if you do not want to have to clean your mixer tapware on a regular basis. You will be able to prolong the time between regular cleaning sessions as a result of this.

Using gentle methods to remove limescale

Alternatively, if limescale has developed, it is preferable to treat it with moderate organic acids, such as acetic acid or citric acid solution. The importance of checking your tapware surfaces for acid resistance before applying the material cannot be overstated. Acidic cleaning agents, for example, should not be used on marble or aluminum, among other surfaces. 

Additionally, many polymers and varnishes are susceptible to acids. When it comes to mixing taps, whether you have a stainless-steel mixer tap, a Silgranit look mixer tap, or a Ceramic look mixer tap, you’re in excellent shape: if handled properly, these materials will withstand cleaning with acetic or citric acid without any problems. Instead of acid cleansers, you may use a moderate descaling spray to remove the scale from your sink. Specifically formulated for use with mixer tapware and sinks, this limescale-removing chemical eliminates limescale buildup. It cleans softly while still being thorough.

To remove limescale from a mixer tapware, apply the cleaning solution to the soft side of a sponge and thoroughly wipe the mixer tap. Make certain that you do not leave acid-based cleaner on for any longer than the time specified on the product directions. Avoid cleaning with the rough side of your sponge for an extended period of time. This has the potential to scratch your mixer tap. Use a microfiber towel to dry your mixer tap after it has been thoroughly rinsed with clean water.

Taking care of the aerator

A picture containing indoor

Hard water may cause the water flow through the mixer tapware, and particularly the aerator, to get blocked over time due to mineral buildup. In addition to being known as a jet regulator or stream shaper, the aerator is the nozzle that is located on the faucet’s output. When the outlet shuts as a result of limescale buildup, water may shoot wildly in all directions when the tap is turned on. As a result, it is necessary to clean the aerator at regular intervals. Visit http://roofingwaltham.com/how-to-clean-black-tapware/ to read about How to clean black tapware.

Acetic acid and citric acid are also effective for this purpose. Clean a sponge with either kind of clean or spread it over the fine mesh at the outlet of the mixer tap to remove any remaining residue. Using an old toothbrush will enable you to clean it even more thoroughly than usual. In the majority of instances, the limescale will dissolve, allowing you to reclaim your clean spray. Spray heads are also equipped with effective anti-scale nubs on the aerator, which substantially minimize the development of limescale and make cleaning the spray heads a breeze.

Remove tenacious deposits from the aerator’s surface

If the limescale is very difficult to remove, you should thoroughly clean the aerator. In many mixer tapware, you may easily remove the tiny nozzle by turning the tap counter-clockwise. The jet regulator may then be steeped in vinegar water or citric acid overnight to remove any remaining residue. The next morning, rinse away any remaining limescale residue and reconnect the aerator by screwing it in counterclockwise to the faucet.

The best way to care for your pull-out spray

When you have a mixer tap with a pull-out spray, it is very convenient since it enables you to reach even the most difficult to reach areas of your tapware sink. Vases and tall-sided pots are simple to fill with flowers. But what happens if the hose no longer slides back into its holder with ease? If this occurs, lubricate the moving components of the hose using a fitting lubricant to prevent further damage. The hose will then slide back into its original place in an effortless motion. This is especially useful for base cabinets since it prevents the hose from getting tangled in other objects or twisting around within the cabinet, which may be dangerous.

A dirt filter may be used to supplement your mixer tap.

Installing a dirt filter on your mixer tap will also help to keep it in good condition. This is specially suggested in older buildings and for pipes that have seen better days. By filtering out dirt particles that come from the water pipes, the tiny metal mesh helps to avoid contaminating your mixer tap and other plumbing fixtures. Located between the angle valve – the water supply valve located under the sink – and the connecting hose for the mixer tap, it serves as a water-tight seal. If you have high pressure, you may connect two filters, one in front of the other, but if you have low pressure, one filter will be adequate.

Final thoughts

Cleaning your bathroom doesn’t have to be a difficult job, and you don’t need to buy costly cleaning solutions to keep filth and grime at bay. Keep up with our bathroom cleaning techniques for sparkling tapware results.

How to clean black tapware

Take a peek at some of the most popular home decor Instagram accounts and you’re certain to find black bathroom faucets and tapware.

Over the past year or two, black tapware has rocketed to the top of fashionable bathroom ‘must haves’ – people can’t get enough of their stunning matt black deliciousness!

However, what good is a trendsetting bathroom – adored by millions of social media followers – if you can’t keep your new matt black taps and fittings clean?

Of course, you may continue as normal, but unlike ‘standard’ bath and basin tapware with metallic surfaces, matt black requires a more careful and deliberate approach to cleaning. Click here to read more about tapware Australia.

One incorrect move with a strong chemical cleaner may be the end of that flawless matt black surface – and with it, the end of your lovely bathroom area!

Therefore, to avoid catastrophe, continue reading to discover how to clean black bathroom taps and maintain the trendy dark noir appearance you’ve been dreaming of!

Why Are Black Taps Difficult to Clean?

A close-up of a person's hand holding a syringe

As you may have guessed from their appearance, matt black tapware have a distinct finish than conventional bathroom tapware designs – and we don’t just mean in terms of color!

Unlike chrome taps, matt black taps are intended to provide a ‘complete’ black appearance by absorbing light rather than reflecting it, resulting in the matt black surface.

Due to the procedures used to achieve the sleek matt surface on your black taps, they are somewhat more sensitive than standard brassware, so selecting the first cleaner you see is not necessarily the greatest choice.

To achieve the beautiful matt black finish, a number of methods are employed, with the majority of producers using either an electroplating process or something called PVD.

Other ranges offer equally durable painted finishes, and certain methods may be combined to get that dark, elegant look. You can read about How to clean your mixer tapware effectively by visiting http://roofingwaltham.com/how-to-clean-your-mixer-tapware-effectively/


Electroplating is a very scientific method of coating the surface of your tapware and brassware with black.

The technique includes manipulating a water-based paint solution at the atomic level with an electric current, transforming it into a very thin layer of black coating.

This results in a robust surface that will withstand daily wear and tear, but you must still use caution while cleaning.


PVD is similar to utilizing one of those vacuum forming machines they used to use in school, in that it requires applying a thin coating of metal to the surface using a vacuum.

Due to the fact that this vacuuming method is more successful than electroplating and results in a more durable matt black surface, it is gaining popularity.

A picture containing indoor, floor, tub, bathtub

Defending Against Black Tape Wear and Tear

While both treatments contribute to the overall quality of your new black tapware, any black finish may be harmed by strong disinfectants and chemical cleaners.

That is why it is essential that you take the time to understand how to properly care for your black tapware – regardless of how they are finished – in order to extend their life and maintain the desired aesthetic.

What Is the Best Way to Clean Matt Black Taps?

After all that, you may be concerned about causing damage if you clean black tapware incorrectly, but honestly, cleaning black taps and brassware is very easy; it just requires a little more care and thought.

Before you begin, there are a few points to keep in mind.

When cleaning black bathroom faucets, avoid the following.

  • Scrubbers, scouring pads, or anything abrasive or scratchy
  • Cleaners containing chemicals 
  • Bleach 
  • Polish or wax 
  • Anything acidic, such as a DIY lemon spray

Bear in mind that this black tapware is your pride and pleasure!

They are delicate and fashionable – they are not made of stainless steel!

Disinfecting Black Taps

To clean black tapware, just use warm water and a soft microfiber cloth.

Nor a penny more, not a penny less.

Clean the tap from top to bottom with a little scrubbing, carefully and without using excessive elbow grease.

There you have it, spotless black faucets.

Is It Possible to Scratch Black Taps?

The simple answer is yes.

However, just like with your vehicle in the driveway, you are not permitted to run sharp things down the side and over the top of your new designer tapware to check whether they scratch!

Of course, you wouldn’t do that, but rings may be tricky with matt black taps, and it’s something we’re all guilty of forgetting about sometimes.

If you do not want to completely remove your rings while using black taps, just be more mindful of them and avoid damaging the surface of the tap.

How Are O-Ring Stains Defined?

After a period of time with your new black tap installed, it’s normal to notice they’ve developed a little stain from the grease applied to the O-ring.

This grease accumulates between the tap’s base and the top of the basin or tapware.

You may attempt to remove this with only a little warm soapy water, but if you struggle and discover that it will not come off, it is okay to use an alcohol cleaning to remove the oil from the tap’s base.

However, use great caution.

If you are uncertain or concerned that cleaning may be too powerful for your faucets, you may contact the makers directly or contact us.

Exercise Caution When Installing

The majority of damage to brassware and tapware happens during the construction and restoration phases – essentially when they are installed.

Check your new black taps immediately upon receipt – they should be immaculate, with no flaws in the polish.

Ensure that you or the tradesperson you’ve hired to install the tap use extreme caution while handling and installing it; after all, they are high-end tapware features that you want to maintain looking their best!

Is Hard Water A Factor When It Comes To Black Taps?

This is possible due to the fact that hard water generates more limescale.

Limescale is a chalky white substance that will undoubtedly stick out on any black brassware, therefore in order to maintain the finish for an extended period of time, you must stay on top of it.

Simply cleaning on a regular basis may keep limescale at bay, so don’t be sluggish!

Take Extra Care When Applying Makeup

If you apply makeup in the bathroom, it’s almost certain that some will end up on your black tapware.

When wiped away, these dusty particles may make black taps seem hazy, so it’s a good idea to have a microfiber cloth handy to remove any irritating powder.